Maemo Leste Wiki - User contributions [en]

Motorola Droid 3

2023-06-18T23:29:32Z

Dogo6647: /* Notes */

{{Infobox Device
|image=
|manufacturer=Motorola
|codename=Solana XT862 / XT860
|dimensions=todo
|release_date=todo
|soc=TI OMAP4430
|dram=512MB DDR2
|power=
|lcd=960x540 4"
|video=PowerVR SGX540
|audio=
|network=
|storage=16GB flash
|usb=
|camera=
|sensors=todo
|other=
|category=Supported
|sw_kernel=6.1.9
|sw_serial=Yes, [[#Serial Cable|special cable]]
|sw_charging=Yes
|sw_usb_slave=Yes
|sw_usb_host=Yes
|sw_touchscreen=Yes
|sw_keyboard=Yes
|sw_screen=Yes
|sw_hdmi=No
|sw_tv=
|sw_3daccel=Yes [https://github.com/maemo-leste/pvr-omap4] (closed)
|sw_vibration=Yes
|sw_audio=Yes
|sw_calls=No (needs modem work)
|sw_sms=No (needs modem work)
|sw_wifi=Yes
|sw_ethernet=
|sw_irda=
|sw_2g3gdata=
|sw_4g=No
|sw_bluetooth=todo
|sw_fmtx=No, but apparently exists, needs serdev kernel modules/drivers
|sw_fmrx=
|sw_nfc=
|sw_accelerometer=Yes
|sw_compass=Yes, no integration
|sw_gyro=
|sw_proximity=Yes
|sw_als=Yes
|sw_gps=No (needs modem work)
|sw_agps=No
|sw_frontcam=No
|sw_backcam=No
|sw_idlepower=
|sw_standbytime=
}}

'''This device is called "Motorola Milestone 3" outside of the US.'''

== Installation ==

Hardware requirements:

* Droid 3 with fully charged battery
* MicroUSB cable
* MicroSD card

Software requirements:
* Host Linux system
* Android Tools: fastboot adb

Download from https://phoenix.maemo.org/view/Images/job/leste-image-bionic/

# Latest maemo-leste-1.0-armhf-bionic-*.img.xz

Download from https://github.com/tmlind/droid4-kexecboot.git

# droid4-kexecboot.img

Download or clone https://github.com/MerlijnWajer/bionic-clown-boot/tree/solana (solana branch!)

Follow the instructions in bionic-clown-boot's readme to install kexecboot on your device.

Now, flash the Maemo Leste image to your sdcard.

== Notes ==

IMPORTANT: Set the USB mode to "PC mode" instead of "mass storage mode" on your device before running install.sh
on bionic-clown-boot

Device is still heavy work in the progress. The following is known not to work:

* Brightness control (screen is always max brightness)
* Keyboard backlight
* Modem interrupts, it is visible on USB but other communication with it doesn't work
* pstore (needs figuring out what the reserved memory is on Android)
* See if we can use 512MB ram instead of 509MB (see dts)
* <s>3d shows some frame lag / misdrawing, so probably powervr clock needs adjusting</s> (seems solved on kernel 5.15)
* <s>touchscreen buttons do not work yet</s> (fixed on 5.15)
* keyboard layout in Leste is not faithful to the icons on the keyboard, but rather mostly mimic droid 4

Additionally, the device suffers from random hangs while in use, causing resets. When pstore works, we can hopefully figure this out. <s>(Haven't seen them on 5.15)</s> (Came back on kernel 6.x) It might be a power-management-related issue, or a GPU issue (last log line shows something about OMAP complaining about DRM), or something else. The emergency shell works just fine with no hangs at all.

Also, the device often comes network locked. [[User:Wizzup]] has access to Sigmakey software and can help remotely remove the network lock.

[[Category:Device]]

Motorola Droid 3

2023-06-18T23:01:14Z

Dogo6647:

{{Infobox Device
|image=
|manufacturer=Motorola
|codename=Solana XT862 / XT860
|dimensions=todo
|release_date=todo
|soc=TI OMAP4430
|dram=512MB DDR2
|power=
|lcd=960x540 4"
|video=PowerVR SGX540
|audio=
|network=
|storage=16GB flash
|usb=
|camera=
|sensors=todo
|other=
|category=Supported
|sw_kernel=6.1.9
|sw_serial=Yes, [[#Serial Cable|special cable]]
|sw_charging=Yes
|sw_usb_slave=Yes
|sw_usb_host=Yes
|sw_touchscreen=Yes
|sw_keyboard=Yes
|sw_screen=Yes
|sw_hdmi=No
|sw_tv=
|sw_3daccel=Yes [https://github.com/maemo-leste/pvr-omap4] (closed)
|sw_vibration=Yes
|sw_audio=Yes
|sw_calls=No (needs modem work)
|sw_sms=No (needs modem work)
|sw_wifi=Yes
|sw_ethernet=
|sw_irda=
|sw_2g3gdata=
|sw_4g=No
|sw_bluetooth=todo
|sw_fmtx=No, but apparently exists, needs serdev kernel modules/drivers
|sw_fmrx=
|sw_nfc=
|sw_accelerometer=Yes
|sw_compass=Yes, no integration
|sw_gyro=
|sw_proximity=Yes
|sw_als=Yes
|sw_gps=No (needs modem work)
|sw_agps=No
|sw_frontcam=No
|sw_backcam=No
|sw_idlepower=
|sw_standbytime=
}}

'''This device is called "Motorola Milestone 3" outside of the US.'''

== Installation ==

Hardware requirements:

* Droid 3 with fully charged battery
* MicroUSB cable
* MicroSD card

Software requirements:
* Host Linux system
* Android Tools: fastboot adb

Download from https://phoenix.maemo.org/view/Images/job/leste-image-bionic/

# Latest maemo-leste-1.0-armhf-bionic-*.img.xz

Download from https://github.com/tmlind/droid4-kexecboot.git

# droid4-kexecboot.img

Download or clone https://github.com/MerlijnWajer/bionic-clown-boot/tree/solana (solana branch!)

Follow the instructions in bionic-clown-boot's readme to install kexecboot on your device.

Now, flash the Maemo Leste image to your sdcard.

== Notes ==

IMPORTANT: Set the USB mode to "PC mode" instead of "mass storage mode" on your device before running install.sh
on bionic-clown-boot

Device is still heavy work in the progress. The following is known not to work:

* Brightness control (screen is always max brightness)
* Keyboard backlight
* Modem interrupts, it is visible on USB but other communication with it doesn't work
* pstore (needs figuring out what the reserved memory is on Android)
* See if we can use 512MB ram instead of 509MB (see dts)
* <s>3d shows some frame lag / misdrawing, so probably powervr clock needs adjusting</s> (seems solved on kernel 5.15)
* <s>touchscreen buttons do not work yet</s> (fixed on 5.15)
* keyboard layout in Leste is not faithful to the icons on the keyboard, but rather mostly mimic droid 4

<s>Additionally, the device suffers from random hangs while in use, causing resets. When pstore works, we can hopefully figure this out.</s> <s>(Haven't seen them on 5.15)</s> (Came back on kernel 6.x)

Also, the device often comes network locked. [[User:Wizzup]] has access to Sigmakey software and can help remotely remove the network lock.

[[Category:Device]]

Motorola Droid 3

2023-05-13T21:02:45Z

Dogo6647:

{{Infobox Device
|image=
|manufacturer=Motorola
|codename=Solana XT862 / XT860
|dimensions=todo
|release_date=todo
|soc=TI OMAP4430
|dram=512MB DDR2
|power=
|lcd=960x540 4"
|video=PowerVR SGX540
|audio=
|network=
|storage=16GB flash
|usb=
|camera=
|sensors=todo
|other=
|category=Supported
|sw_kernel=6.1.9
|sw_serial=Yes, [[#Serial Cable|special cable]]
|sw_charging=Yes
|sw_usb_slave=Yes
|sw_usb_host=Yes
|sw_touchscreen=Yes
|sw_keyboard=Yes
|sw_screen=Yes
|sw_hdmi=Untested
|sw_tv=
|sw_3daccel=Yes [https://github.com/maemo-leste/pvr-omap4] (closed)
|sw_vibration=Yes
|sw_audio=Yes
|sw_calls=No (needs modem work)
|sw_sms=No (needs modem work)
|sw_wifi=Yes
|sw_ethernet=
|sw_irda=
|sw_2g3gdata=
|sw_4g=No
|sw_bluetooth=todo
|sw_fmtx=No, but apparently exists, needs serdev kernel modules/drivers
|sw_fmrx=
|sw_nfc=
|sw_accelerometer=Yes
|sw_compass=Yes, no integration
|sw_gyro=
|sw_proximity=Yes
|sw_als=Yes
|sw_gps=No (needs modem work)
|sw_agps=No
|sw_frontcam=No
|sw_backcam=No
|sw_idlepower=
|sw_standbytime=
}}

'''This device is called "Motorola Milestone 3" outside of the US.'''

== Installation ==

Hardware requirements:

* Droid 3 with fully charged battery
* MicroUSB cable
* MicroSD card

Software requirements:
* Host Linux system
* Android Tools: fastboot adb

Download from https://phoenix.maemo.org/view/Images/job/leste-image-bionic/

# Latest maemo-leste-1.0-armhf-bionic-*.img.xz

Download from https://github.com/tmlind/droid4-kexecboot.git

# droid4-kexecboot.img

Download or clone https://github.com/MerlijnWajer/bionic-clown-boot/tree/solana (solana branch!)

Follow the instructions in bionic-clown-boot's readme to install kexecboot on your device.

Now, flash the Maemo Leste image to your sdcard.

== Notes ==

IMPORTANT: Set the USB mode to "PC mode" instead of "mass storage mode" on your device before running install.sh
on bionic-clown-boot

Device is still heavy work in the progress. The following is known not to work:

* Brightness control (screen is always max brightness)
* Keyboard backlight
* Modem interrupts, it is visible on USB but other communication with it doesn't work
* pstore (needs figuring out what the reserved memory is on Android)
* See if we can use 512MB ram instead of 509MB (see dts)
* <s>3d shows some frame lag / misdrawing, so probably powervr clock needs adjusting</s> (seems solved on kernel 5.15)
* <s>touchscreen buttons do not work yet</s> (fixed on 5.15)
* keyboard layout in Leste is not faithful to the icons on the keyboard, but rather mostly mimic droid 4

<s>Additionally, the device suffers from random hangs while in use, causing resets. When pstore works, we can hopefully figure this out.</s> <s>(Haven't seen them on 5.15)</s> (Came back on kernel 6.x)

Also, the device often comes network locked. [[User:Wizzup]] has access to Sigmakey software and can help remotely remove the network lock.

[[Category:Device]]

Motorola Droid 3

2023-05-13T20:46:47Z

Dogo6647:

{{Infobox Device
|image=
|manufacturer=Motorola
|codename=Solana XT862 / XT860
|dimensions=todo
|release_date=todo
|soc=TI OMAP4430
|dram=512MB DDR2
|power=
|lcd=960x540 4"
|video=PowerVR SGX540
|audio=
|network=
|storage=16GB flash
|usb=
|camera=
|sensors=todo
|other=
|category=Supported
|sw_kernel=5.15.0
|sw_serial=Yes, [[#Serial Cable|special cable]]
|sw_charging=Yes
|sw_usb_slave=Yes
|sw_usb_host=Yes
|sw_touchscreen=Yes
|sw_keyboard=Yes
|sw_screen=Yes
|sw_hdmi=Untested
|sw_tv=
|sw_3daccel=Yes [https://github.com/maemo-leste/pvr-omap4] (closed)
|sw_vibration=Yes
|sw_audio=Yes
|sw_calls=No (needs modem work)
|sw_sms=No (needs modem work)
|sw_wifi=Yes
|sw_ethernet=
|sw_irda=
|sw_2g3gdata=
|sw_4g=No
|sw_bluetooth=todo
|sw_fmtx=No, but apparently exists, needs serdev kernel modules/drivers
|sw_fmrx=
|sw_nfc=
|sw_accelerometer=Yes
|sw_compass=Yes, no integration
|sw_gyro=
|sw_proximity=Yes
|sw_als=Yes
|sw_gps=No (needs modem work)
|sw_agps=No
|sw_frontcam=No
|sw_backcam=No
|sw_idlepower=
|sw_standbytime=
}}

'''This device is called "Motorola Milestone 3" outside of the US.'''

== Installation ==

Hardware requirements:

* Droid 3 with fully charged battery
* MicroUSB cable
* MicroSD card

Software requirements:
* Host Linux system
* Android Tools: fastboot adb

Download from https://phoenix.maemo.org/view/Images/job/leste-image-bionic/

# Latest maemo-leste-1.0-armhf-bionic-*.img.xz

Download from https://github.com/tmlind/droid4-kexecboot.git

# droid4-kexecboot.img

Download or clone https://github.com/MerlijnWajer/bionic-clown-boot/tree/solana (solana branch!)

Follow the instructions in bionic-clown-boot's readme to install kexecboot on your device.

Now, flash the Maemo Leste image to your sdcard.

== Notes ==

IMPORTANT: Set the USB mode to "PC mode" instead of "mass storage mode" on your device before running install.sh
on bionic-clown-boot

Device is still heavy work in the progress. The following is known not to work:

* Brightness control (screen is always max brightness)
* Keyboard backlight
* Modem interrupts, it is visible on USB but other communication with it doesn't work
* pstore (needs figuring out what the reserved memory is on Android)
* See if we can use 512MB ram instead of 509MB (see dts)
* <s>3d shows some frame lag / misdrawing, so probably powervr clock needs adjusting</s> (seems solved on kernel 5.15)
* <s>touchscreen buttons do not work yet</s> (fixed on 5.15)
* keyboard layout in Leste is not faithful to the icons on the keyboard, but rather mostly mimic droid 4

<s>Additionally, the device suffers from random hangs while in use, causing resets. When pstore works, we can hopefully figure this out.</s> <s>(Haven't seen them on 5.15)</s> (Came back on kernel 6.x)

Also, the device often comes network locked. [[User:Wizzup]] has access to Sigmakey software and can help remotely remove the network lock.

[[Category:Device]]

Motorola Droid 3

2023-05-13T08:14:00Z

Dogo6647: Added an idiot-proof short note to ensure the user installs kexecboot correctly

{{Infobox Device
|image=
|manufacturer=Motorola
|codename=Solana XT862 / XT860
|dimensions=todo
|release_date=todo
|soc=TI OMAP4430
|dram=512MB DDR2
|power=
|lcd=960x540 4"
|video=PowerVR SGX540
|audio=
|network=
|storage=16GB flash
|usb=
|camera=
|sensors=todo
|other=
|category=Supported
|sw_kernel=5.15.0
|sw_serial=Yes, [[#Serial Cable|special cable]]
|sw_charging=Yes
|sw_usb_slave=Yes
|sw_usb_host=Yes
|sw_touchscreen=Yes
|sw_keyboard=Yes
|sw_screen=Yes
|sw_hdmi=Untested
|sw_tv=
|sw_3daccel=Yes [https://github.com/maemo-leste/pvr-omap4] (closed)
|sw_vibration=Yes
|sw_audio=Yes
|sw_calls=No (needs modem work)
|sw_sms=No (needs modem work)
|sw_wifi=Yes
|sw_ethernet=
|sw_irda=
|sw_2g3gdata=
|sw_4g=No
|sw_bluetooth=todo
|sw_fmtx=No, but apparently exists, needs serdev kernel modules/drivers
|sw_fmrx=
|sw_nfc=
|sw_accelerometer=Yes
|sw_compass=Yes, no integration
|sw_gyro=
|sw_proximity=Yes
|sw_als=Yes
|sw_gps=No (needs modem work)
|sw_agps=No
|sw_frontcam=No
|sw_backcam=No
|sw_idlepower=
|sw_standbytime=
}}

'''This device is called "Motorola Milestone 3" outside of the US.'''

== Installation ==

Hardware requirements:

* Droid 3 with fully charged battery
* MicroUSB cable
* MicroSD card

Software requirements:
* Host Linux system
* Android Tools: fastboot adb

Download from https://phoenix.maemo.org/view/Images/job/leste-image-bionic/

# Latest maemo-leste-1.0-armhf-bionic-*.img.xz

Download from https://github.com/tmlind/droid4-kexecboot.git

# droid4-kexecboot.img

Download or clone https://github.com/MerlijnWajer/bionic-clown-boot/tree/solana (solana branch!)

Follow the instructions in bionic-clown-boot's readme to install kexecboot on your device.

Now, flash the Maemo Leste image to your sdcard.

== Notes ==

IMPORTANT: Set the USB mode to "PC mode" instead of "mass storage mode" on your device before running install.sh
on bionic-clown-boot

Device is still heavy work in the progress. The following is known not to work:

* Brightness control (screen is always max brightness)
* Keyboard backlight
* Modem interrupts, it is visible on USB but other communication with it doesn't work
* pstore (needs figuring out what the reserved memory is on Android)
* See if we can use 512MB ram instead of 509MB (see dts)
* <s>3d shows some frame lag / misdrawing, so probably powervr clock needs adjusting</s> (seems solved on kernel 5.15)
* <s>touchscreen buttons do not work yet</s> (fixed on 5.15)
* keyboard layout in Leste is not faithful to the icons on the keyboard, but rather mostly mimic droid 4

<s>Additionally, the device suffers from random hangs while in use, causing resets. When pstore works, we can hopefully figure this out.</s> (Haven't seen them on 5.15)

Also, the device often comes network locked. [[User:Wizzup]] has access to Sigmakey software and can help remotely remove the network lock.

[[Category:Device]]