Difference between revisions of "Motorola Droid 4"

From Maemo Leste Wiki
Jump to navigationJump to search
(→‎Notes: Add instructions for device freezes case)
(→‎Notes: Minor fixes)
Line 24: Line 24:
== Notes ==
== Notes ==


The battery in Droid4 is not easily removable. If you got the device stuck, use this combo: power button + bottom volume button. Your should hold it for about 7 seconds. The device should reboot.
The battery in Droid4 is not easily removable. If you got the device stuck, use this combo: power button + bottom volume button. You should hold them for about 7 seconds. Droid4 will then reboot.


Also see [[Motorola_Droid_4/Modem]] [[Motorola_Droid_4/PowerVR]]
Also see [[Motorola_Droid_4/Modem]] [[Motorola_Droid_4/PowerVR]]

Revision as of 05:00, 17 January 2020

This page or section is a stub. Ask how you can help improve leste.maemo.org by visiting #maemo-leste, look at the bugtracker (https://github.com/maemo-leste/bugtracker) or if you are able to contribute to the current page, then you are welcome to do so.

Motorola Droid 4
Motorola Droid 4 - Leste pre-alpha.jpg
Manufacturer Motorola
Codename Maserati
Specifications
Hardware Features
Software Features


Notes

The battery in Droid4 is not easily removable. If you got the device stuck, use this combo: power button + bottom volume button. You should hold them for about 7 seconds. Droid4 will then reboot.

Also see Motorola_Droid_4/Modem Motorola_Droid_4/PowerVR

Also see: http://elektranox.org/droid4/ While using a serial cable, if you lose the connection, the following may help:

18:43 < tmlind> sicelo: hmm the uart debug cable multiplexing still has issues, if the uart disappears during boot it should come back with 
                the console login propt later
18:45 < tmlind> try plugging in a pc usb cable then back to uart cable in case that might help

Status

Feature Leste supported Notes
Kernel version 5.0 Mainline + some patches not yet in mainline
Serial Yes On MicroUSB port, requires special cable
Charging Yes
Wireless Yes
Ethernet N/A
Micro USB Yes OTG
Keyboard Yes Slightly modified keyboard layout, see https://www.spinics.net/lists/linux-omap/msg135137.html (TLDR; Shift key produces CTRL, SYM produces ALT, and Caps lock produces SHIFT)
Screen Yes
3D Acceleration Not yet Also PowerVR - see Motorola Droid 4/PowerVR
Touchscreen Yes Capacitive
Audio Yes
2G/3G data WIP Reported to work, no UI yet - see https://github.com/maemo-leste/connui-cellular/
SMS WIP Reported to work, no UI yet
Phone calls WIP Reported to work, no UI yet
Bluetooth Not yet Needs firmware. Download https://github.com/TI-ECS/bt-firmware/blob/master/TIInit_10.6.15.bts and save it in /lib/firmware/ti-connectivity/
FM Transmitter N/A
FM Receiver Not yet
Accelerometer ? Available as input device, needs MCE work
Proximity sensor ?
HDMI-out WIP works, but not with hildon-desktop
TV-out N/A
Vibration Motor Yes
Compass No Mainline supports it, so Leste needs to add config

Installation using kexecboot

Hardware requirements:

  • Droid4 with fully charged battery
  • MicroUSB cable
  • MicroSD card

Software requirements:

  • Host Linux or Windows system
  • Android Tools: fastboot
  • Flashing tools:
    • XZ Utils and coreutils for Linux
    • Etcher[1] for Windows

Download from https://maedevu.maemo.org/images/droid4/

  1. VRZ_XT894_9.8.2O-72_VZW-18-8_CFC.xml.zip
  2. Latest maemo-leste-1.0-armhf-droid4-*.img.xz

Download from https://github.com/tmlind/droid4-kexecboot.git

  1. utags-mmcblk1p13.bin
  2. droid4-kexecboot.img

Installation:

  1. Create a working directory with above mentioned files in it
  2. unzip VRZ_XT894_9.8.2O-72_VZW-18-8_CFC.xml.zip
  3. Power off Droid4 and connect it to the host machine with MicroUSB cable
  4. Start the device in fastboot mode. For this press power button and bottom volume key simultaneously and release them after a second.

Now go to the working directory and run:

sudo fastboot flash mbm VRZ_XT894_9.8.2O-72_VZW-18-8_CFC.xml/allow-mbmloader-flashing-mbm.bin
sudo fastboot reboot-bootloader
sudo fastboot flash bpsw droid4-kexecboot.img
sudo fastboot flash utags utags-mmcblk1p13.bin
sudo fastboot reboot

The device should reboot and show kexecboot menu for a few seconds before it boots to Android.

Now, flash the Maemo Leste image to your sdcard:

On Linux:

xzcat maemo-leste-1.0-armhf-droid4-20200112.img.xz | sudo dd of=/dev/MICROSDCARD-DEVICE
sync

On Windows: Use Etcher

Wait for sync to complete and insert MicroSD card into Droid4. Reboot the device and select Maemo Leste from the kexecboot menu.

You should now see Maemo Leste booting up, and it will show you unaccelerated hildon-desktop after a minute.

Kernel development (old and outdated)

Linux 4.14 plus patches

Status: http://elektranox.org/droid4/

Sources: linux-stable 4.14.y, patches