Motorola Xoom2 MZ609

From Maemo Leste Wiki
Revision as of 16:25, 16 January 2023 by Wizzup (talk | contribs) (Created page with "{{Infobox Device |image=250px |manufacturer=Motorola |codename=Fleming MZ609 |dimensions= |release_date=TODO |soc=TI OMAP4430 |...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
Motorola Xoom2 MZ609
Motorola Droid 4 - Leste pre-alpha.jpg
Manufacturer Motorola
Codename Fleming MZ609
Release Date TODO
Category Supported
Specifications
SoC TI OMAP4430
DRAM 1024MB DDR2
Hardware Features
LCD TODO
Video PowerVR SGX540
Storage TODO
Sensors TODO
Software Features
Kernel 6.1.x
Serial Yes, special cable
Charging Yes
USB Slave Yes
USB Host Yes
Touchscreen Yes
Keyboard N/A
Screen No
HDMI-out Yes
3D acceleration Yes [1] (closed)
Vibration motor Yes
Audio Yes
Phone calls Yes
SMS Yes
Wifi Yes
2G/3G data Yes
Bluetooth Yes, see notes
FM transmitter No, but apparently exists, needs serdev kernel modules/drivers
Accelerometer Yes
Compass Yes, no integration
Proximity Sensor Yes
Ambient Light Sensor Yes
GPS Yes
A-GPS No
Front Camera No
Back Camera(s) No
Idle Power Consumption ?

Installation

Hardware requirements:

  • Droid4 with fully charged battery
  • MicroUSB cable
  • MicroSD card

Software requirements:

  • Host Linux or Windows system
  • Android Tools: fastboot
  • Flashing tools:
    • XZ Utils and coreutils for Linux
    • Etcher[2] for Windows

Download from https://maedevu.maemo.org/images/mz609/

  1. VRZ_XT894_9.8.2O-72_VZW-18-8_CFC.xml.zip TODO CHANGE
  2. flash-droid-4-fw.sh TODO CHANGE
  3. Latest maemo-leste-1.0-armhf-droid4-*.img.xz

Download from https://github.com/tmlind/droid4-kexecboot.git

  1. utags-mmcblk1p13.bin
  2. droid4-kexecboot.img

Check what kernel version your Android OS runs. For this go to Settings -> About phone. Slide to the bottom, where you can see "Kernel version". If you have at least 3.0.8, you may skip "Updating Android" step below.

Installation:

TODO

Updating Android

TODO

Setting up kexecboot

TODO

Now, assuming you are in the working directory, install kexecboot:


If you did "Updating Android" the device should run the firstboot steps. If you didn't, the device should reboot and show kexecboot menu for a few seconds before it boots to Android.

Install Maemo Leste to the sdcard