Difference between revisions of "Status/Wireless"

Revision as of 11:45, 2 June 2021

Client mode should just work using the UI.

Open, WEP, WPA PSK and EAP networks should just work. Day to day usage should work fine.

To do:

Support passive scans: https://github.com/maemo-leste/bugtracker/issues/149
Support more/new EAP methods: https://github.com/maemo-leste/bugtracker/issues/145
Ad-Hoc mode not supported yet: https://github.com/maemo-leste/bugtracker/issues/154
Support WPA3/SAE
Integration with hotspot missing
Support wifi powersaving: https://github.com/maemo-leste/bugtracker/issues/172
Set the regdomain country based on ofono modem data (country)

There is no UI for this yet.

To share your mobile data over wireless, you will need to install dnsmasq and hostapd.

You will want to set `wpa=2`, `ssid=` and `wpa_passphrase` in hostapd.conf, like so (of course, there might be other options that are set):

wpa=2
ssid=Internet
wpa_passphrase=secureinternetpassword

You can copy the example config files to /etc/hostapd/

For /etc/dnsmasq.conf, make sure `interface=` includes at least `lo,wlan0`, like so:

interface=lo,wlan0

You might also want to change `dhcp-range=` in the config file to match the subnet of your wireless interface ip, per our example:

dhcp-range=192.168.44.50,192.168.44.150,12h

Then restart dnsmasq.

Next, configure iptables:

sudo iptables -A POSTROUTING -t nat -s 192.168.44.1/24 -j MASQUERADE
sysctl -w net.ipv4.ip_forward=1

And finally bring up the interface and run hostapd:

sudo ifconfig wlan0 192.168.44.2
sudo hostapd -i wlan0 /etc/hostapd/hostapd.conf

@@ Line 4: / Line 4: @@
 == Features ==
-* Open, WEP, WPA PSK and EAP networks should just work
+Open, WEP, WPA PSK and EAP networks should just work. Day to day usage should work fine.
 == Known bugs / To do ==
@@ Line 23: / Line 24: @@
 * Support wifi powersaving: https://github.com/maemo-leste/bugtracker/issues/172
 * Set the regdomain country based on ofono modem data (country)
 == Mobile Hotspot ==