View source for Google Pixel 3a

{{Infobox Device
|manufacturer=Google
|codename=Pixel 3A, Google sargo
|release_date=2019
|category=Supported
|soc=Qualcomm Snapdragon 670
|ram=4GB
|soc=2 x 2 GHz, 6 x 1.7GHz
|display=1080x2220 OLED
|video= adreno 615
|audio=yes
|network=yes
|storage=64GB
|usb=Micro USB C
|camera=yes, qcam
|sensors=yes
|other=
|headers=
|battery=3000mAh
|sw_kernel=6.12
|sw_serial=
|sw_charging=Yes
|sw_touchscreen=Yes, multitouch
|sw_screen=Yes
|sw_hdmi=
|sw_3daccel=Yes
|sw_vibration=Yes
|sw_audio=Yes
|sw_calls=Yes
|sw_sms=Yes
|sw_wifi=Yes
|sw_ethernet=
|sw_irda=No
|sw_2g3gdata=Yes
|sw_4gdata=Yes
|sw_bluetooth=Yes
|sw_fmtx=No
|sw_fmrx=No
|sw_nfc=
|sw_accelerometer=Yes
|sw_compass=
|sw_gyro=
|sw_proximity=Yes
|sw_als=Yes
|sw_gps=Yes, modemmanager only
|sw_agps=Yes, modemmanager only
|sw_frontcam=Yes, qcam
|sw_backcam=Yes, qcam
|sw_idlepower=280mW
|sw_standbytime=50h
}}

== Installation ==

WIP

WARNING: Flashing Maemo Leste to your device will erase your Android installation and all the data contained in it.

=== Flash mode ===

WIP

To enter flash mode:

Hold "Volume Down" and "Power" buttons until fastboot appears.

=== Bootloader setup ===

WIP

Device bootloader needs to be unlocked: from Android, go to "About phone" page in Settings app. Then, click 7 times on the build number to enable developer settings.
From Setting main page, go to "System", "Developer options" and enable OEM unlocking.

Before flashing Maemo Leste, you need to unlock the bootloader in fastboot mode with this command:

fastboot flashing unlock

=== Installation with fastboot ===

WIP

== Tweaks ==

WIP