View source for Nokia N9

{{Infobox Device
|image=
|manufacturer=Nokia
|codename=Lankku
|dimensions=116.5x61.2x12.1mm
|release_date=September 2011
|soc=TI OMAP3630
|dram=1024M
|power=
|lcd=480x854 3.9" AMOLED
|video=PowerVR SGX530
|audio=
|network=
|storage=16/64GB flash
|usb=
|camera=
|sensors=
|other=
}}

[[Category:Device]]

== Status ==

TODO

== Partitioning ==

https://talk.maemo.org/showthread.php?t=91914


== Installation ==

'''WORK IN PROGRESS'''

In Harmattan, go to '''Settings->Applications->Installations''' and enable '''Allow installation from non-Store sources'''.
Then connect to WiFi and navigate to http://maedevu.maemo.org/images/n9/n9repomirror_0.7.2_armel.deb and install the package.

After installation, go to '''Settings->Security->Developer mode''' and enable '''Developer mode'''. Your device will do some
operations and then reboot. Once rebooted, reconnect to WiFi if necessary and go back to '''Settings->Security->Developer mode'''
and install '''Debugging''' (other packages as a plus). Now you should have a Terminal app.

For root access, in the terminal you can type:

 $ devel-su
 Password: rootme

For ssh access, set a password for the user:
 $ devel-su
 # passwd user 

Then you can ssh:
 $ ssh user@RM696

Remove openmode warning:
 $ devel-su
 # disclaimer-cal remove View-openmode

Download ubiboot (on device):

 $ mkdir -p /home/user/MyDocs/boot && cd /home/user/MyDocs/boot
 $ wget http://maedevu.maemo.org/images/n9/ubiboot-02_0.3.5_301013.tar
 $ tar xf ubiboot-02_0.3.5_301013.tar
 $ rm ubiboot-02_0.3.5_301013.tar
 $ md5sum *
 e76ed3f0cf0cc172f668b970ae778a71  md5sums.txt
 d1e1a6eb6d877f53a01e946a5ccf5017  ubiboot-02.menus.cpio
 adfbdc7d6cca6638b2dd079105d8daeb  ubiboot.conf
 d6d7081cffe2684944f141bc9a71fea9  zImage_2.6.32.54-ubiboot-02_301013
 $ devel-su
 # cd /boot
 # wget http://maedevu.maemo.org/images/n9/zImage_2.6.32.54-openmode_l2fix
 # cd /
 # wget http://maedevu.maemo.org/images/n9/preinits.tar
 # md5sum preinits.tar
 515a8e1e5506f45afbc139c137d496b7  preinits.tar
 # tar xf preinits.tar
 # rm preinits.tar

Put your device in Upgrade mode:

 $ lsusb
 Bus 001 Device 084: ID 0421:0105 Nokia Mobile Phones Nokia Firmware Upgrade Mode

Disable watchdogs:

 # 0xFFFF -F no-omap-wd,no-ext-wd,no-lifeguard-reset

Power off the N9 completely, and run flasher to flash ubiboot kernel, then connect the N9 with USB:

 # flasher -a firmware.bin -k zImage_2.6.32.54-ubiboot-02_301013 --flash-only=kernel -f -R

If everything was performed correctly, the device should boot in an animated bootmenu if you disconnected
the USB cable, or maintenance mode if USB is still connected.