Status/Wireless

Client mode should just work using the UI.

Features

• Open, WEP, WPA PSK and EAP networks should just work

Known bugs / To do

• Hidden APs do not fully work yet: https://github.com/maemo-leste/bugtracker/issues/489
• Flight mode might not disable wifi: https://github.com/maemo-leste/bugtracker/issues/190 / https://github.com/maemo-leste/bugtracker/issues/397
• Server certificates are not verified currently: https://github.com/maemo-leste/bugtracker/issues/137
• Scan results could be returned sooner: https://github.com/maemo-leste/bugtracker/issues/342
• easy-wlan wizard might be a bit buggy: https://github.com/maemo-leste/bugtracker/issues/221

To do:

• Support passive scans: https://github.com/maemo-leste/bugtracker/issues/149
• Support more/new EAP methods: https://github.com/maemo-leste/bugtracker/issues/145
• Ad-Hoc mode not supported yet: https://github.com/maemo-leste/bugtracker/issues/154
• Support WPA3/SAE
• Integration with hotspot missing
• Support wifi powersaving: https://github.com/maemo-leste/bugtracker/issues/172
• Set the regdomain country based on ofono modem data (country)

Mobile Hotspot

There is no UI for this yet.

To share your mobile data over wireless, you will need to install dnsmasq and hostapd.

You will want to set `wpa=2`, `ssid=` and `wpa_passphrase` in hostapd.conf, like so (of course, there might be other options that are set):

wpa=2
ssid=Internet
wpa_passphrase=secureinternetpassword

You can copy the example config files to /etc/hostapd/

For /etc/dnsmasq.conf, make sure `interface=` includes at least `lo,wlan0`, like so:

interface=lo,wlan0

You might also want to change `dhcp-range=` in the config file to match the subnet of your wireless interface ip, per our example:

dhcp-range=192.168.44.50,192.168.44.150,12h

Then restart dnsmasq.

Next, configure iptables:

sudo iptables -A POSTROUTING -t nat -s 192.168.44.1/24 -j MASQUERADE
sysctl -w net.ipv4.ip_forward=1

And finally bring up the interface and run hostapd:

sudo ifconfig wlan0 192.168.44.2
sudo hostapd -i wlan0 /etc/hostapd/hostapd.conf