Motorola Xoom2 MZ609
From Maemo Leste Wiki
Jump to navigationJump to search
| Motorola Xoom2 MZ609 | |
|---|---|
 | |
| Manufacturer | Motorola |
| Codename | Fleming MZ609 |
| Release Date | TODO |
| Category | Supported |
| Specifications | |
| SoC | TI OMAP4430 |
| DRAM | 1024MB DDR2 |
| Hardware Features | |
| LCD | TODO |
| Video | PowerVR SGX540 |
| Storage | TODO |
| Sensors | TODO |
| Software Features | |
| Kernel | 6.1.x |
| Serial | Yes, special cable |
| Charging | Yes |
| USB Slave | Yes |
| USB Host | Yes |
| Touchscreen | Yes |
| Keyboard | N/A |
| Screen | No |
| HDMI-out | Yes |
| 3D acceleration | Yes [1] (closed) |
| Vibration motor | Yes |
| Audio | Yes |
| Phone calls | Yes |
| SMS | Yes |
| Wifi | Yes |
| 2G/3G data | Yes |
| Bluetooth | Yes, see notes |
| FM transmitter | No, but apparently exists, needs serdev kernel modules/drivers |
| Accelerometer | Yes |
| Compass | Yes, no integration |
| Proximity Sensor | Yes |
| Ambient Light Sensor | Yes |
| GPS | Yes |
| A-GPS | No |
| Front Camera | No |
| Back Camera(s) | No |
| Idle Power Consumption | ? |
Installation
Hardware requirements:
- Droid4 with fully charged battery
- MicroUSB cable
- MicroSD card
Software requirements:
- Host Linux or Windows system
- Android Tools: fastboot
- Flashing tools:
- XZ Utils and coreutils for Linux
- Etcher[2] for Windows
Download from https://maedevu.maemo.org/images/mz609/
- VRZ_XT894_9.8.2O-72_VZW-18-8_CFC.xml.zip TODO CHANGE
- flash-droid-4-fw.sh TODO CHANGE
- Latest maemo-leste-1.0-armhf-droid4-*.img.xz
Download from https://github.com/tmlind/droid4-kexecboot.git
- utags-mmcblk1p13.bin
- droid4-kexecboot.img
Check what kernel version your Android OS runs. For this go to Settings -> About phone. Slide to the bottom, where you can see "Kernel version". If you have at least 3.0.8, you may skip "Updating Android" step below.
Installation:
TODO
Updating Android
TODO
Setting up kexecboot
TODO
Now, assuming you are in the working directory, install kexecboot:
If you did "Updating Android" the device should run the firstboot steps. If you didn't, the device should reboot and show kexecboot menu for a few seconds before it boots to Android.
