Difference between revisions of "Status/USB Peripheral"
From Maemo Leste Wiki
Jump to navigationJump to search (Created page with "Currently, devices that are supported by Maemo Leste will automatically set up USB networking if you plug them into a PC. Mass Storage may show as an option, but doesn't do an...") |
(No difference)
|
Revision as of 21:59, 3 November 2018
Currently, devices that are supported by Maemo Leste will automatically set up USB networking if you plug them into a PC. Mass Storage may show as an option, but doesn't do anything useful yet.
To also have the devices use your PC network, log into the devices:
ifconfig usb0 up 192.168.42.1 ssh root@192.168.42.2
And then add the following route:
ip route add default via 192.168.42.1
On your PC, issue:
# (Maybe only one of these two echos is necessary) echo 1 > /proc/sys/net/ipv4/conf/usb0/forwarding echo 1 > /proc/sys/net/ipv4/ip_forward iptables -A POSTROUTING -t nat -s 192.168.42.2/32 -j MASQUERADE
Now your Leste device should be able to use your PC network