Difference between revisions of "Status/Wireless"

From Maemo Leste Wiki
Jump to navigationJump to search
Line 1: Line 1:
Client mode should just work using the UI.
Client mode should just work using the UI.


== Features ==
* Open, WEP, WPA PSK and EAP networks should just work
== Known bugs / To do ==
* Hidden APs do not fully work yet: https://github.com/maemo-leste/bugtracker/issues/489
* Flight mode might not disable wifi: https://github.com/maemo-leste/bugtracker/issues/190 / https://github.com/maemo-leste/bugtracker/issues/397
* Server certificates are not verified currently: https://github.com/maemo-leste/bugtracker/issues/137
* Scan results could be returned sooner: https://github.com/maemo-leste/bugtracker/issues/342
* easy-wlan wizard might be a bit buggy: https://github.com/maemo-leste/bugtracker/issues/221
To do:
* Support passive scans: https://github.com/maemo-leste/bugtracker/issues/149
* Support more/new EAP methods: https://github.com/maemo-leste/bugtracker/issues/145
* Ad-Hoc mode not supported yet: https://github.com/maemo-leste/bugtracker/issues/154
* Support WPA3/SAE
* Integration with hotspot missing
* Support wifi powersaving: https://github.com/maemo-leste/bugtracker/issues/172
* Set the regdomain country based on ofono modem data (country)


== Mobile Hotspot ==
== Mobile Hotspot ==

Revision as of 11:44, 2 June 2021

Client mode should just work using the UI.


Features

  • Open, WEP, WPA PSK and EAP networks should just work

Known bugs / To do

To do:

Mobile Hotspot

There is no UI for this yet.

To share your mobile data over wireless, you will need to install dnsmasq and hostapd.

You will want to set `wpa=2`, `ssid=` and `wpa_passphrase` in hostapd.conf, like so (of course, there might be other options that are set):

wpa=2
ssid=Internet
wpa_passphrase=secureinternetpassword

You can copy the example config files to /etc/hostapd/

For /etc/dnsmasq.conf, make sure `interface=` includes at least `lo,wlan0`, like so:

interface=lo,wlan0

You might also want to change `dhcp-range=` in the config file to match the subnet of your wireless interface ip, per our example:

dhcp-range=192.168.44.50,192.168.44.150,12h

Then restart dnsmasq.

Next, configure iptables:

sudo iptables -A POSTROUTING -t nat -s 192.168.44.1/24 -j MASQUERADE
sysctl -w net.ipv4.ip_forward=1

And finally bring up the interface and run hostapd:

sudo ifconfig wlan0 192.168.44.2
sudo hostapd -i wlan0 /etc/hostapd/hostapd.conf