Difference between revisions of "PinePhone"

From Maemo Leste Wiki
Jump to navigationJump to search
Line 118: Line 118:
How to dd to the SD card:
How to dd to the SD card:


In a terminal window, use the command below, making sure you replace the input file <code>if=</code> argument with the path to your file, and the <code>/dev/sdX</code> in the output file <code>of=</code> argument with the correct device name. This is very important, as you will lose all the data on the hard drive if you provide the wrong device name. Make sure the device name is the name as described above, with no partition numbers. For example: sdd, not sdds1 or sddp1; mmcblk0, not mmcblk0p1. In most cases with SD cards, your computer might read the SD card as mmcblk0 or something similar.
In a terminal window, use the command below, making sure you replace the input file <code>if=</code> argument with the path to your file, and the <code>/dev/sdX</code> in the output file <code>of=</code> argument with the correct device name. This is very important, as you will lose all the data on the hard drive if you provide the wrong device name. Make sure the device name is the name as described above, with no partition numbers. For example: sdd, not sdds1 or sddp1; mmcblk0, not mmcblk0p1. In most cases with SD cards, your computer might read the SD card as mmcblk0 or something similar. Don't copy and paste this command, type it out and use TAB completion.


     dd bs=4M if=maemo-leste-*-arm64-pinephone-*.img.*z of=/dev/sdX conv=fsync
     dd bs=4M if=maemo-leste-*-arm64-pinephone-*.img.*z of=/dev/sdX conv=fsync

Revision as of 04:59, 4 March 2020

This page or section is a stub. Ask how you can help improve leste.maemo.org by visiting #maemo-leste, look at the bugtracker (https://github.com/maemo-leste/bugtracker) or if you are able to contribute to the current page, then you are welcome to do so.

PinePhone
Manufacturer Pine64
Specifications
SoC Allwinner A64
Hardware Features
Software Features

The first Pinephone (braveheart) phone

Notes

Testing images repo.

What you can do with the 20200223 image:

  • Run any applications in Debian and Devuan on your phone
  • Connect to wifi
  • Use the terminal
  • (With not yet finished userspace, terminal only) connect to 2G/3G/4G data connections

TODO mention/link to:

  • USB peripheral
  • Develop for Maemo Leste and work on applications that interface with modems
  • Make it work on latest pine64 kernel

Note that:

  • Virtual keyboard should work in all gtk2 applications (not yet in gtk3 and qt, but this is coming).
  • Default virtual keyboard is set to off. You may want to go to setting and change that first for using the terminal. Click the top left corner->"Settings"->"Text input"->check the "Use virtual keyboard" option. You may also want to change the keyboard layout by changing the dictionary setting.
  • WiFi and terminal work.
  • Some rendering bugs in portrait mode remain, so the default desktop orientation is landscape for now (xrandr -o right). Please note that if orientation is changed (e.g. with xrandr -o normal) the ui will still be reading original key positions.
  • Screen brightness adjustments in UI do not work on the Pinephone yet. There is also a user reported when "brightness" UI setting is set to minimum (no visual change normally), the screen will stay black after reboot with WiFi set to ON with kill switch. However screen is normal after reboot if WiFi set to OFF with kill switch even minimum "brightness" UI setting. You may still change the screen brightness with terminal commands: xrandr --output DSI-1 --brightness 0.5
  • Performance is not bad, but will get better, with hildon-desktop optimisations and as lima improves.
  • We are not shipping the latest Pinephone kernel yet (feel free to work on that, or anything above!)
  • Many "games" packages in the Application Manager don't work well yet.
  • For some reason the X cursor is still shows (usually it's hidden)

Status

Feature Leste supported Notes
Kernel version 5.4 Mainline + some patches: https://gitlab.com/pine64-org/linux/tree/pine64-kernel-5.4.y
Serial Yes Via headphone jack (disable headphone switch)
Charging Yes
Wireless Yes Involves installing out of tree driver
Ethernet N/A
Bluetooth ?
Infrared N/A TX only (hardware limitation).
USB C Yes Peripheral/slave only, exposes network gadget by default. Host Untested
Keyboard N/A !
Screen Yes Modesetting driver
3D Acceleration Yes lima (!)
Touchscreen Yes Capacitive
Audio Yes
2G/3G data WIP Works with ofono; UI underway: https://github.com/maemo-leste/connui-cellular ; see https://github.com/maemo-leste/bugtracker/issues/76
SMS WIP Works with ofono, will using telepathy-ring, no UI yet, not enabled by default
Phone calls WIP Reported to work, not enabled by default, community is quite far along, needs to work package their work
Accelerometer ? Available as input device, needs MCE work
Proximity sensor ?
RGB LED WIP Works, but mce can't deal with LEDs without controllers yet.
Vibration Motor ?
GPS WIP Should work on the modem

Installation

Unlike most phones, it's pretty simple.

Download the image and the corresponding .sha file, then verify the image's integrity:

cat /path/to/image/maemo-leste-*-arm64-pinephone-*.img.sha
sha256sum /path/to/image/maemo-leste-*-arm64-pinephone-*.img.*z

Verify that the number that each command spits out is exactly the same number. If it is not, do not use the image. Try redownloading or ask for help.

dd the image to an sd card. If using a Windows machine, you can use Etcher NOTE: Etcher does not warn you before starting the flashing operation, so please be extra careful that you choose the correct device to flash to.

How to dd to the SD card:

In a terminal window, use the command below, making sure you replace the input file if= argument with the path to your file, and the /dev/sdX in the output file of= argument with the correct device name. This is very important, as you will lose all the data on the hard drive if you provide the wrong device name. Make sure the device name is the name as described above, with no partition numbers. For example: sdd, not sdds1 or sddp1; mmcblk0, not mmcblk0p1. In most cases with SD cards, your computer might read the SD card as mmcblk0 or something similar. Don't copy and paste this command, type it out and use TAB completion.

   dd bs=4M if=maemo-leste-*-arm64-pinephone-*.img.*z of=/dev/sdX conv=fsync

Please note that block size set to 4M will work most of the time. If not, try 1M, although this will take considerably longer. Also note that if you are not logged in as root you will need to prefix this with sudo.

Then insert SD card, replace the back cover, and turn it on.